When was the last time the roof of your building was inspected? If it has been awhile, the roof may have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while others produce subtle signs that are only detectable on the surface. In either case, leaving the issues unaddressed can cost you a small fortune when you finally repair them. If the roof on your own building has any of the problems listed below, a company that focuses on commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow within the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels in place. This creates a space where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. Once the blisters form, warm weather typically makes them worse. As a result of humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more technical. Often, installing Professional roofing services to determine a new slope is the best solution. Through the rainy season, resolving ponding water is probably the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as chimneys and vents. Over time, most flashing must be resealed. If it’s not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.

Missing Mortar

Chimneys and high elements of brick walls that have parts of missing mortar could cause leaks. These leaks are often mistaken for leaks in the roof membrane, but a thorough inspection by a company that specializes in commercial roofing will reveal the true problem. Most sections of missing mortar could be repaired with basic tuck pointing procedures.

Conclusion

The problems above are a few of the most common known reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the greatest solution to ensure problems are detected early.